LVPC-DIM

LVPC

Low Voltage Control Interface with Dimming

The LVPC-DIM interface enables on/off/dimming control of two AC powered lighting loads and on/off control of a third AC load via low-voltage, momentary contact switches, such as those found on patient pillow speakers, bed communication side rails, and nurse call auxiliary outputs.

Only a single switch is required for full control of each load, allowing use of existing patient controls and simple momentary wall switches.



Features

  • Wide-range 120-277VAC, 50/60Hz input
  • Can be used with fluorescent, LED, and other lamp types (dimmable ballasts or drivers required for dimming functionality)
  • Controls up to 6 general-use and ballast-type loads
  • Simple field configuration using DIP switches for following modes of operation:
    • Two loads with 0-10V dimming and a third load independently
    • Two loads with 0-10V dimming and a third load that deactivates the first two loads when on
    • Two loads with 0-10V dimming and a third load that also turns on the second load at full output when on
    • Two loads with 0-10V dimming and a third load that also turns on the first two loads at full output when on
  • One control switch or contact required per load.  Additional switches/contacts may be wired in parallel to permit control from multiple locations

Applications

  • Patient rooms
  • Conference rooms
  • Classrooms
  • Electric Doors
  • Window Coverings

Documentation

OE1003 LVPC-DIM Data Sheet

OE1003 LVPC-DIM User Guide

OE1003 LVPC-DIm Wiring Guide